Lulehonline company

Carogate pipe (sewage polyethylene pipe)

110 and 125 mm Carrogate pipe: used in domestic sewage and electrical cable casing, which has very little consumption and is produced almost to order. 160 mm Carrogate pipe: This Carrogate pipe is usually used for plumbing systems in the sewers of complexes and urban sewers, drainage pipes and under urban trucks. Usually, when they want to build an alley bridge or local bridges, they use Carogate 160 pipe. Carrogate pipe 200 mm: the most widely used size of Carrogate pipe, which is used in sewage systems, drainage and sheath around the pipe and cable and its one-meter pieces to protect valves in drip irrigation. Bekshand uses this size and size 250. It is very suitable for the price and it is always available online as a depot. Carrogate 250 mm pipe: after size 200, it is the most widely used diameter for use in sewage and drainage networks, of course, these pipes are used in a large amount, and it is called a 10-inch pipe, which has a useful diameter of 25 cm. Carrogate 315 mm pipe and Carrogate 400 mm pipe: Used in urban sewage networks and sewage of complexes and hospitals and drainage pipes, Tehran Metro Company used these pipes for drainage in most areas. The number of Carrogate 400 tubes that fit in singles and pairs is much more suitable than 500. 12 inch pipe is the same as 315 pipe, sometimes 350 and 300 pipe are mistakenly called the same 12 inch pipe. 350 and 300 tubes are not always available and are only produced to order. Carrogate 500 mm pipe: It is used in urban sewage, surface water collection and high access valves, which is relatively more expensive and its high price has increased the use of 400 pipe in this field. In general, 500 khel is very low consumption. 600 mm Carogate pipe: for sewage and surface water collection networks and human passages on tanks Carrogate 800 and 1000 mm Carrogate pipes: can be used in the main sewer network and pedestrian crossings and drainage pipes and river water transfer by gravity, usually Carrogate 900 pipe is very low consumption and 1000 or 800 is always used.

sofa tube

In general, many brands operate in the field of producing pipes and fittings. But all these brands do not only produce high-quality products, and their products must be checked before buying. Of course, note that there are 3 to 4 well-known brands in the field of pipes and fittings that you can choose to buy furniture pipes. These brands are Homa East Industry Factory, Saveh Rolling and Profile Factory, Saba Pipe and Profile Factory and Sab Qazvin Steel Factory. Each of these brands has a lot of history and experience in the field of producing pipes and fittings, and this is one of the reasons for their popularity. For example, Saba Pipe and Profile Factory has nearly 40 years of experience in the field of pipe production, and this makes many customers choose the products of this brand. Sab Qazvin Steel Factory produces high-quality products, including furniture pipes, which can be a good choice for you, considering the equipment and facilities it uses to produce pipes. Saveh Profile Rolling Factory is one of the oldest factories producing pipes and fittings in Iran. This factory has officially started its activity since 1354 and has released many products to the market. One of the most powerful groups that currently has a lot of power in the production of furniture pipes and other light pipes and profiles is Khavarsanat Homa factory, which started its activity in 1377. This factory currently has more than 15 production lines, which shows the high power of this factory. Of course, other brands such as Mahdi Factory, Aria Factory and Persian Gulf Factory are also active in the field of pipe and fittings production; These factories have produced and launched suitable products using well-equipped devices and high-quality equipment.

High density polyethylene (HDPE) pipe

The density of this type of polyethylene pipe is 0.941 grams per cubic centimeter or more. Due to the low degree of branching, HDPE has strong intermolecular forces and high tensile strength. Pipe branching is reduced by using different types of catalysts and controlling the conditions. The characteristics of HDPE, whose natural color is white, are: - Excellent chemical resistance - Good resistance to weather conditions - High resistance to tearing and pressure - High resistance to stress cracking - Corrosion resistance - Low friction - Heat and electricity insulation More flexibility than LDPE

City siphon

Siphons are divided in two directions. In the general classification, siphons are divided into two categories. siphon model s. This siphon model has a higher performance speed compared to the next model. Siphon model p. This model is also known as ostrich and is very suitable for use in toilets, bathrooms and kitchens. This model has a lower operating speed, but on the other hand, it benefits from higher quality and efficiency. From another point of view, siphons are divided into shallow and deep categories based on depth. The shallow model has a depth of about 5 cm and is suitable for normal work, but in special circumstances, a deep siphon can be used, which is twice as deep as the previous model.

Manisman's tube

Manisman tube is available in 20, 40 and 80 categories. The Mannesmann pipe category is the thickness of the pipe wall. Class 20 Manisman tube: It is used for gasification inside the building. Category 20 pipes should use Manisman category 20 fittings because the same thickness of fittings and pipes is important in this section. According to the recommendation of the engineering system, in a 5-story building, you should use Manisman class 20 pipe for gas piping. Because in case of vibration or damage, the pipe will not crack or crack. Manisman tube, category 40: Manisman grade 40 pipe is used in towers and fire lines. In the connection of this pipe, Manisman joints with thickness and category 40 are used. The most and most used Manisman pipe category belongs to category 40. Manisman tube, category 80: In places where work pressure and sensitivity are high, the category above 40 is considered. Like things like oil, gas, petrochemical and thermal power plants, Manisman grade 80 pipe is used.

Electric pipe

There are different types of electrical conduits or pipes in the market with different materials. Its types are: Steel electrical pipe This type of pipe can be used in both surface and built-in ways. The steel electric pipe is resistant to impact and does not absorb dust. By bending these tubes by the machine, they can be used in different parts. The high compressive strength of these pipes makes them highly resistant to corrosion. This type of pipe is not resistant to rust. Steel or electrical conduit pipes are more popular than other pipes. Galvanized electric pipe This type of pipe is available in two types of cold and hot galvanized, which are resistant to rust with a coating of zinc and cadmium. These pipes are used in the form of work and in the gypsum substrate. Polyethylene electrical pipe Soft plastic pipes that are stronger than hose pipes and softer than PVC pipes. The price of this type of pipe is higher than PVC pipes. Polyamide electricity pipe These soft plastic pipes are used in more than half of the buildings. Polyamides are light and flexible tubes that are cheaper and less expensive than other types of electric tubes. But the flammability and flammability of this type of pipe has prevented its use in many facilities. PVC electrical pipe It is a type of hard plastic pipes that are suitable for use in concrete roofs. Although these pipes are impact-resistant and not heat-resistant, their resistance to chemicals, oxidation and corrosion, and their insulation, along with their cheap price, still make these pipes popular for use. Hose power pipe These pipes are in two types, plastic and metal. The plastic hose pipe is made of PVC and is known for its high flexibility and low endurance. Flexible metal hose pipes are used as facing.